Since 1995
LIVE PRO AUDIO
LINE ARRAY SYSTEMS
LV-210 LV-212 is a linear array full range speaker consisting of one high-frequency compression drive unit
and two low-frequency drive units. It is a compact passive dual band linear array speaker. These units are
symmetrically placed to achieve excellent consistency and smooth horizontal coverage. Using specially
designed linear tweeters to increase output sound pressure. Convenient and simple speaker angle adjustment
makes the on-site sound more uniform and covers a wider range. The outer layer is made of 18 meter thick
birch plywood and coated with wear-resistant matte black paint.Acoustic sponge with high sound
transmission rate is attached to the surface net to prevent dust and rain erosion.
Linear Array Speaker System
LV-210
Component unit：LF:10x2/ HF:φ44mmx1
Frequency res(±3dB)：68Hz-18kHZ
Sensitity(1m/1W) ：98dB
Maximum SPL: 128dB
Power(RMS/Continous：600W / 1200W
Coverage(H×V)：90°x10°
Impedanceï¼›8Ω
Input connector：NL4x2,+1 -1
Mounting accessories：Aluminum suspension assembly
Speaker measurement：815x420x294mm
Weight：30.6KG
LV-212
Component unit：LF:12x2/ HF:φ75mmx1
Frequency res(±3dB)：68Hz-20kHZ
Sensitity(1m/1W) ：98dB
Maximum SPL: 130dB
Power(RMS/Continous：800W / 1600W
Coverage(H×V)：90°x10°
Impedanceï¼›8Ω
Input connector：NL4x2,+1 -1
Mounting accessories：Aluminum suspension assembly
Speaker measurement：948x455x346mm
Weight：39.5KG
LINE ARRAY DEMO
POWER AMPLIFIERS
SHOCKWAVE by LIVE
SWA 1500 x 4
Stereo dual channel mode:
8Ω 1500W x 4
4Ω 2500W x 4
​
Bridge mono mode:
8Ω 5000W
​
THD<0.1% (10% of full power), IMD <0.05% (60Hz/ 7KHz, 10% of full power)
​
Signal to noise ratio: >106dB
Conversion speed: >60 V/us,
damping coefficientL >600; 1 (8Ω 100Hz)
​
Frequency Response: 20Hz + 20KHz
Input sensitivity: .775V, 1V, 32dB
​
Input impedance: 10K Ω / 20K Ω (unbalanced / balanced)
​
Measurement：483 x 430 x 44mm
Weight：10.2KG
​
​
​
​
SWA 4000 x2
Stereo dual channel mode:
8Ω 4000W x 2
4Ω 6000W x 2
​
Bridge mono mode:
8Ω 8000W
​
THD<0.1% (10% of full power), IMD <0.05% (60Hz/ 7KHz, 10% of full power)
​
Signal to noise ratio: >106dB
Conversion speed: >60 V/us,
damping coefficientL >600; 1 (8Ω 100Hz)
​
Frequency Response: 20Hz + 20KHz
Input sensitivity: .775V, 1V, 32dB
​
Input impedance: 10K Ω / 20K Ω (unbalanced / balanced)
​
Measurement：483 x 430 x 44mm
Weight：10.2KG
​
​
​
​
POWER AMPLIFIER PACKAGE
SWA 1500 x 4
&
SWA 4000 x2
